Technical Specification : Furnace Oil
Updated on 21st April 2015
Specification For Furnace Oil 800 Sec (A0026L99)
Property/Test | Method(ASTM-D) | Specifications |
---|---|---|
Density @15 0 C kg/m3 | 1298/4052 | Max 970 |
Flash Point (PMCC) 0 C | 93 | Min 60 |
Pour Point 0 C | 97 | Max 21.1 |
Sulphur Content % (w/w) | 4294 | Max 3.5 |
Redwood 1 @37.8 0 C Sec | Max 800 | |
Viscosity Kinematic @ 50 0 C | 445 | Report |
Water content %(v/v) | 95 | Max 1.0 |
Ash % wt | 482 | Max 0.2 |
Conradson Carbon % w/w or Micro Carbon Residue % w/w |
189 4530 |
Max 12 |
Sediment by Extraction ppm | 473 | Max 0.25 |
Caloric Value (gross) k.Cal/kg | 240 | Min 10200 |
Strong Acid No. KOH mg /g | 974 | Nil |
Metal Contaminants | ||
V | 3605 | Max 200 ppm |
Na + K | 3605 | Report |
Ca | 3605 | Report |
Pb | 3605 | Report |
Specification For Lanka Fuel Oil Super (A0025L99)
Property/Test | Test Method(IP) | Test Method(ASTM-D) | Specifications |
---|---|---|---|
Density @150 C kg/m3 | 160 | 1298 | 900-970 |
Flash Point (PMCC)0 C ( 0F) | 34 | 93 | Min 60 |
Pour Point0 C ( 0F) | 15 | 97 | Max 30 |
Sulphur Content % (w/w) | 61 | 4294 | Max 2.0 |
Viscosity Kinematic @ 500 C,cSt | 71 | 445 | 60-100 |
Water content %(v/v) | 74 | 95 | Max 1.0 |
Ash % wt | 4 | 482 | Max 0.1 |
Conradson Carbon % w/w or Micro Carbon Residue% W/w |
189 4530 |
Max 12 | |
Sediment by Extraction % (w/w) | 53 | 473 | Max 0.1 |
Total Sediment Potential % (w/w) | 4870 | Max 0.1 | |
Caloric Value (gross) kCal/kg | 12 | 240 | Min 10500 |
Strong Acid No. KOH mg /g | 1/177 | 974/664 | Nil |
Metal Contaminants | |||
Vanadium (V) | 501 | 3605 | Max 65 ppm |
Sodium(Na) + Potassium(K) | 501 | 3605 | Max 30 ppm |
Calsium (Ca) | 501/470 | 3605 | Max 10 ppm |
Lead (Pb) | 3605 | Max 1.0 ppm | |
Aluminium (Al)+Silicon(Si) | 501/377 | Max 80 ppm | |
Zinc(Zn) | 501/470 | Report | |
Phosphorus (P) | 501/500 | Report | |
Ferrous (Fe) | 501 | 3605 | Report |
Specification For Furnace Oil 1500 Sec (A0039L99)
Property/Test | Test (IP) | Method(ASTM-D) | Specifications |
---|---|---|---|
Density @150 C kg/m3 | 160 | 1298 | Max 970 |
Flash Point (PMCC)0 C ( 0F) | 34 | 93 | Min 60 (Min 140) |
Pour Point0 C ( 0F) | 15 | 97 | Max 21.1(70) |
Sulphur Content % (w/w) | 61 | 129 or 1552 | Max 3.5 |
Redwood 1 @1000 F Sec (Note 1) | Max 1500 | ||
Viscosity Kinematic @ 500 C (1120F) | 71 | 445 | Report |
Water content %(v/v) | 74 | 95 | Max 1.0 |
Ash % wt | 4 | 482 | Max 0.2 |
Conradson Carbon % w/w | 189 | Max 12 | |
Sediment by Extraction ppm | 53 | 473 | Max 0.25 |
Caloric Value (gross) k.Cal/kg | 12 | 240 | Min 10200 |
Strong Acid No. KOH mg /g | 1 | 974 | Nil |
Metal Contaminants | 3605 | Max 200 ppm | |
V | 3605 | Max 200 ppm | |
Na + K | 3605 | Report | |
Ca | 3605 | Report | |
Pb | 3605 | Report |